Vrs Delay Announcement - NEC SL2100 Programming Manual

SL2100
Level:
SA
Description
Use Program 41-11 : VRS Delay Announcement to assign the VRS message number to use as the
Program
message source for the 1st and 2nd Delay Announcement Messages. Refer to Program 41-08 for
more on setting up the ACD overflow options.
41
This program is activated when the delay announcement source and options are assigned as VRS in
Program 41-08-03.
Input Data
Item
No.
01 Delay Message Start
Timer
02 1st Delay Message
Number
03 1st Delay Message
Sending Count
04 2nd Delay Message
Number
05 2nd Waiting Message
Sending Count
06 Tone Kind at Message
Interval
07 ACD Forced Discon-
nect Time after the
2nd DelayMessage
08 Queue Depth An-
nouncement
Conditions
None
2-400
ACD Group No.
Item Input Data
0 ~ 64800 (seconds)
0 ~ 101
0 = No Message
101 = Fixed Message
0 ~ 255
0 ~ 101
0 = No Message
101 = Fixed Message
0 ~ 255
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0 ~ 64800 (seconds)
(0 = No Disconnect)
0 = Disable
1 = After 1st (1st)
2 = After 2nd (2nd)
3 = After 1st and 2nd
(1st and 2nd)
Program 41 : ACD Setup

41-11 : VRS Delay Announcement

Description
Input the time before the 1st Delay Mes-
sage Starts.
Input the VRS Message to be played as
the 1st Delay Message.
Input the number of times the 1st Delay
Message is sent. If set to 0, the message
is not played.
Input the VRS Message to be played as
the 2nd Delay Message.
Input the number of times the 2nd Delay
Message is sent. If set to 0, the message
is not played.
Input what is heard between the Delay
messages.
Set the time, after the last 2nd Delay Mes-
sage is played, before the call is discon-
nected.
Input when the Queue Depth Announce-
ment is played.
ISSUE 2.0
1 ~ 8
Default
0
0
0
0
0
0
60
0
Program 41 : ACD Setup