Software Update Time Setting - NEC SL2100 Programming Manual

ISSUE 2.0
Level:
IN
Description
Use Program 90-36 : Software Update Time Setting to define the data for the firmware update
feature. This data is available to set from the PC Programming FW update feature.
The following firmware is available to update with this feature:
• main.bin
• Dspdbu.bin
• dsp.bin
• intradbu.bin is not supported
Input Data
Item Item
No.
01 Automatic Update
04 Day of Week
05 Hour
06 Minute
08 Manual Update
09 Month
10 Day
12 Hour
13 Minute
Programming Manual
Program 90 : Maintenance Program

90-36 : Software Update Time Setting

Input Data
0 = Disable
1 = Enable
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday
0 ~ 23 = Hour
(Default = 0)
0 ~ 59 = Minute
(Default = 0)
0 = Disable
1 = Enable
1 = January
2 = February
3 = March
4 = April
5 = May
6 = June
7 = July
8 = August
9 = September
10 = October
11 = November
12 = December
1 ~ 31
0 ~ 23
0 ~ 59
Default Description
0 Enable or Disable the Automatic Up-
grade Feature.
2 Assign the day of the week that the
Automatic Update should take place.
23 Assign the hour of the day the Auto-
matic Upgrade to run.
0 Assign the minute of the hour for the
Automatic update to run.
0 Enable or Disable the Manual Update.
1 Assign the month for the system re-
boot in case of manual update.
1 Assign the day of the month for the
system to reboot to update the soft-
ware.
0 Assign the hour of the day for the sys-
tem to reboot to update the software.
0 Assign the Minute of the Hour for the
system to reboot.
SL2100
Program
90
2-609