Class Of Service Options (Outgoing Call Service) - NEC SL2100 Programming Manual

ISSUE 2.0

20-08 : Class of Service Options (Outgoing Call Service)

Level:
IN
Description
Use Program 20-08 : Class of Service Options (Outgoing Call Service) to define the outgoing call
feature availability for each extension Class of Service (COS).
Input Data
Class of Service Number
Item Item
No.
01 Intercom Calls
02 Trunk Outgoing
Calls
03 System Speed
Dialing
04 Group Speed Di-
aling
05 Dial Number Pre-
view (Preset Dial)
06 Toll Restriction
Override
07 Repeat Redial
08 Toll Restriction
Dial Block
09 Hotline/Exten-
sion Ringdown
10 Signal/Voice Call
11 Protect for the
Call Mode
Switching from
Caller
12 Department
Group Step Call-
ing
Programming Manual
Program 20 : System Option Setup
Input Data
0 = Off Turns off or on Intercom calling for
1 = On
0 = Off Turns off or on outgoing trunk calling
1 = On
0 = Off (Deny) Turns off or on an extension ability
1 = On to make outbound calls using sys-
tem speed dial numbers.
0 = Off (Deny) Turns off or on an extension ability
1 = On to make outbound calls using group
0 = Off Turns off or on an extension for us-
1 = On ing Dial Number Preview.
0 = Off Turns off or on Toll Restricting Over-
1 = On ride (Service Code 663).
0 = Off Turns off or on an extension to use
1 = On
0 = Off Turns off or on an extension to use
1 = On
0 = Off Turns off or on Ringdown Extension
1 = On for extensions with this COS.
0 = Off Turns off or on an extension allow-
1 = On ing it to force Handsfree Answer-
back or Forced Intercom Ringing for
0 = Off
1 = On
0 = Off Turns off or on an extension to use
1 = On Department Group Step Calling.
1 ~ 15
Description
the extension.
for the extension.
speed dial numbers.
Repeat Redial.
Dial Block.
outgoing Intercom calls.
(Internal Call)
SL2100
Default Related
Program
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0 21-01-07
21-07
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
2-191
Program
20