Class Of Service Options For Disa/E&M - NEC SL2100 Programming Manual

SL2100
Level:
IN
Description
Use Program 20-14 : Class of Service Options for DISA/E&M to enable/disable DISA and tie line
Program
Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09. Assign
tie line Classes of Service in 34-02. Up to 15 DISA/E&M Classes of Service can be defined.
20
Analog trunk-to-analog trunk and ISDN trunk-to-ISDN trunk calls are supported by this program.
However, analog trunk-to-ISDN trunk and ISDN trunk-to-analog trunk calls are NOT supported by this
program.
Input Data
Item
No.
01 First Digit Absorption
(Delete First Digit Di-
aled)
02 Trunk Group
Routing/ARS Access
03 Trunk Group Access
04 Outgoing System
Speed Dial
05 Operator Calling
06 Internal Paging
07 External Paging
08 Direct Trunk Access
09 Forced Trunk Discon-
nect <Not for ISDN T-
point>
2-204
Program 20 : System Option Setup
20-14 : Class of Service Options for DISA/E&M
Class of Service Number
Item Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
1 ~ 15
Description
For tie lines, enable or disable the ability to
absorb (ignore) the first incoming digit.
Use this to make the tie trunk compatible
with 3- and 4-digit tie line service. This op-
tion does not apply to DISA.
This option enables or disables a DISA or
tie trunk caller ability to dial 9 for Trunk
Group Routing or Automatic Route Selec-
tion (ARS/F-Route).
This option enables or disables a DISA or
tie trunk caller ability to access trunk
groups for outside calls (Service Code
704).
This option enables or disables DISA or tie
trunk caller ability to use the System
Speed Dialing.
This option enables or disables a DISA or
tie trunk caller ability to dial 0 for the tele-
phone system operator.
This option enables or disables a DISA or
tie trunk caller ability to use the telephone
system Internal Paging.
This option enables or disables a DISA or
tie trunk caller ability to use the telephone
system External Paging.
This option enables or disables a DISA or
tie trunk caller ability to use Direct Trunk
Access (Service Code #9).
This option enables or disables a tie trunk
caller ability to use Forced Trunk Discon-
nect (Service Code 11-10-26). This option
is not available to DISA callers.
Program 20 : System Option Setup
ISSUE 2.0
Default
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0