Vrs Delay Announcement - NEC SL1100 Programming Manual

ISSUE 6.0
Level:
SA
(This Program is available for V1.5 or higher)
Description
Use Program 41-11 : VRS Delay Announcement to assign the VRS message number to use as the
message source for the 1st and 2nd Delay Announcement Messages. Refer to Program 41-08 for
more on setting up the ACD overflow options.
This program is activated when the delay announcement source and options are assigned as VRS in
Program 41-08-03.
Input Data
ACD Group No.
Item Item
No.
01 Delay Message Start
Timer
02 1st Delay Message
Number
03 1st Delay Message
Sending Count
04 2nd Delay Message
Number
05 2nd Waiting Message
Sending Count
06 Tone Kind at Message
Interval
07 ACD Forced Discon-
nect Time after the
2nd DelayMessage
08 Queue Depth An-
nouncement
Conditions
None
Programming Manual
Program 41 : ACD Setup

41-11 : VRS Delay Announcement

Input Data
0 ~ 64800 (seconds) Input the time before the 1st Delay Mes-
sage Starts.
0 ~ 101 Input the VRS Message to be played as
0 = No Message the 1st Delay Message.
101 = Fixed Message
0 ~ 255 Input the number of times the 1st Delay
Message is sent. If set to 0, the message
is not played.
0 ~ 101 Input the VRS Message to be played as
0 = No Message the 2nd Delay Message.
101 = Fixed Message
0 ~ 255 Input the number of times the 2nd Delay
Message is sent. If set to 0, the message
is not played.
0 = Ring Back Tone Input what is heard between the Delay
1 = MOH Tone messages.
2 = BGM Source
0 ~ 64800 (seconds) Set the time, after the last 2nd Delay Mes-
(0 = No Disconnect) sage is played, before the call is discon-
nected.
0 = Disable Input when the Queue Depth Announce-
1 = After 1st (1st) ment is played.
2 = After 2nd (2nd)
3 = After 1st and 2nd
(1st and 2nd)
01 ~ 02
Description
SL1100
Program
41
Default
0
0
0
0
0
0
60
0
2-373