Technical Characteristics - Ariston SLIM 40 Instructions For Installation, Use, Maintenance

Ref. Warning
Do not attempt to clean the appliance without
6
first turning it off and unplugging it or switching
the dedicated switch off.
Install the appliance on a solid wall that is
7
not subjected to any vibrations.
Make all electrical connections using
8
conductors with a suitable section.
Reset all the safety and control functions
affected by any interventions performed on
9
the appliance and make sure they operate
correctly before re-using the appliance.
SPECIFIC SAFETY NORMS FOR THIS APPLIANCE
Ref. Warning
Before handling, empty all components that
10
may contain hot water, carrying out any
bleeding if necessary.
Descale the components, in accordance with
the instructions provided on the "safety data
sheet" of the product used, airing the room,
11
wearing protective clothing, avoid mixing
different products, and protect the appliance
and surrounding objects.
Do not use any insecticides, solvents or
12
aggressive detergents to clean the appliance.

TECHNICAL CHARACTERISTICS

For the technical characteristics of the appliance, please refer to the information provided on the data plate (label
located near the water inlet and outlet pipes).
Model
Theoretical Weight
This appliance complies with the provisions set forth in the EEC/89/336 EMC directive on electromagnetic compatibility.
INSTALLATION NORMS (for the installer)
WARNING! Follow the general warnings and the safety norms listed at the
!
beginning of the text and keep to all the instructions given under all circumstances.
The installation and set-up of the water heater must be carried out by a competent person in conformity with
the applicable norms in force and with any provisions set forth by local authorities and public health bodies.
The appliance heats water to a temperature below boiling point. It must be linked up to a mains water supply according
to the appliance performance levels and capacity.
Before connecting the appliance, it is first necessary to:
- Check whether the characteristics (please refer to the data plate) meet the customer's requirements.
- Make sure the installation conforms to the IP degree (of protection against the penetration of liquids) of the appliance
according to the applicable norms in force.
- Read the instructions provided on the packaging label and on the appliance data plate.
SLIM
40 50
kg. 15,5 19
Risk
Electrocution from live components.
Appliance falling due to the wall giving way,
or excessive noise during operation
Fire due to overheating from electrical
current passing through undersized
cables.
Damage or shutdown of the appliance due
to out-of-control operation.
Risk
Personal injury from burns.
Personal injury due to contact of the skin or
eyes with acidic substances, inhalation or
swallowing of harmful chemical agents.
Damage to the appliance or surrounding
objects due to corrosion caused by acidic
substances.
Damage to the plastic and painted parts.
65 50
21 19
GB
Symbol
!
!
!
!
Symbol
!
!
REGULAR
65 80 100
21 23,5 27
13