Step 5: Execute The Exposure - AGFA DR 10e User Manual

82 | DR 10e, DR 14e, DR 17e | Getting started

Step 5: execute the exposure

Press the exposure button to execute the exposure.
At the NX workstation:
• The image is acquired from the DR detector and displayed in the
• If collimation is applied, the image is automatically cropped at the
0370C EN 20200228 1449
Make sure the generator is ready for exposure before you
press the exposure button.
WARNING:
The radiation indicator on the control console lights up
during exposure release.
WARNING:
Do not select another thumbnail until the preview image is
visible in the active thumbnail.
thumbnail.
collimation borders.