Dr Detector Is Not Switched To Standby Or Switched Off Automatically - AGFA DR 10e User Manual

112 | DR 10e, DR 14e, DR 17e | Problem solving
DR Detector is not switched to standby or switched off
automatically
Details
Cause
Brief
Solution
0370C EN 20200228 1449
The DR detector is configured to switch to standby (sleep) or to
switch off after not being used for a specific time, but it stays ac-
tive.
In following conditions, the DR detector will not be switched to
standby or be switched off automatically:
• On the NX workstation an empty thumbnail is selected for an
exposure on the DR detector
• The NX software is not running
• The DR detector is out of range of the wireless network
• The DR detector is being calibrated
• The DR detector is in error
Make sure none of the above conditions apply.