Renewing The Eps License - AGFA DR 10e User Manual

Table of Contents

Advertisement

108 | DR 10e, DR 14e, DR 17e | Advanced Operating

Renewing the EPS license

The EPS variant of the DR detector requires an active EPS license (Easy
Payment Scheme). The EPS license is stored on the licensing dongle that is
plugged into the NX workstation. The EPS license must be renewed at regular
intervals via an online web portal.
The EPS variant of the DR detector is identified by the word "EPS" printed
next to the model name at the back side of the DR detector.
The DR detector must only be used for making exposure using the NX
software. If an NX workstation is configured with an EPS variant of the DR
detector, no other DR detectors can be additionally be configured on the NX
workstation. If an EPS DR detector is shared between NX workstations, an EPS
license must be stored on the dongle of each of the workstations and the
procedure for renewing the EPS license must be performed for each dongle.
Five days before the renewal of the EPS license is due, messages start to
appear on the NX workstation.
1. Plug in the dongle on a PC with access to the internet.
• If the NX workstation has access to the internet, the renewal procedure
• If the NX workstation has no access to the internet, remove the dongle
2. Open a browser and navigate to the online web portal for EPS.
http://www.licensing.healthcare.agfa.net
3. Log in to the web portal and follow the instructions on the screen.
After completing the procedure, the EPS license is renewed and stored on
the dongle.
4. Reinsert the dongle into the NX workstation.
5. Stop the DR detector.
0370C EN 20200228 1449
WARNING:
In case the renewal due date is not met, the license expires and
the DR detector cannot be used for examinations until the
license is renewed. If the product is used in critical clinical
workflows, a backup system has to be foreseen.
can be performed on the NX workstation.
from the NX workstation and plug it in on a PC with access to the
internet.
Note: Do not leave the NX workstation running without
the dongle for more than a day. If the dongle is not
plugged in again after a day, the license grace period will
eventually run down.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents