Step 5: Execute The Exposure - AGFA DX-D 60C User Manual

Step 5: execute the exposure

Press the exposure button to execute the exposure.
At the NX workstation:
• The image is acquired from the DR detector and displayed in the
thumbnail.
• If collimation is applied, the image is automatically cropped at the
collimation borders.
Make sure the generator is ready for exposure before you
press the exposure button.
WARNING:
The radiation indicator on the control console lights up
during exposure release.
WARNING:
Do not select another thumbnail until the preview image is
visible in the active thumbnail.
DX-D 60C, DX-D 60G | Getting started | 65
0294B EN 20190221 1131