Yearly Inspection - AGFA DR 10e User Manual

Yearly inspection

To indicate when the yearly calibration is due, a message is displayed on the
NX workstation.
Perform calibration yearly or when exposure conditions have changed
significantly. For details, refer to the DX-D DR Detector Calibration Key
User Manual (0134).
Calibration
DR 14e G and DR 17e G do not require calibration.
DR 10e C, DR 14e C and DR 17e C require yearly calibration.
A single set of calibration data is used for all NX Workstations on which the
DR Detector is used. Perform the regular calibration each time on the same NX
Workstation.
DR 10e, DR 14e, DR 17e | Introduction to the DR Detector | 55
0370C EN 20200228 1449