Automatically Turning The Dr Detector To Sleep; Automatically Turning Off Dr Detector - AGFA DR 10s User Manual

Automatically turning the DR Detector to sleep

The DR Detector can be configured to switch to standby (sleep) automatically
after not being used for a specific time.
New exposures can be made. After selecting an exposure on the NX
workstation, there will be a short delay until the DR Detector becomes ready
for exposure.

Automatically turning off DR Detector

The DR Detector can be configured to switch off automatically after not being
used for a specific time.
For making new exposures, the DR Detector must be started again using the
power button.
DR 10s | Getting started | 79
0351A EN 20190319 1349 *