Maintenance; Replacing Supplies - Cornelius HELIX Operator's Manual

R S
EPLACING UPPLIES
© 2012-2014,Cornelius Inc. All Rights Reserved

MAINTENANCE

!
WARNING:
Never use a water jet (power washer) to clean the exterior of the unit.
!
WARNING:
Do not store explosive substances, such as aerosol cans with a flammable
propellant in this unit.
The Helix unit is capable of using syrups with particulate matter up to 1/8" in size.
To replace a product bag, perform the procedure in Table 12.
Step
1 Open the product door, shown in Figure 22.
Remove the tray containing the empty product bag, shown in Figure 23.
2
Make sure to close the cabinet door after removing the tray.
Remove the bag from the tray by pulling the BIB connector up and
3
unsnapping it from the tray.
Replace the product bag in the tray and snap the BIB connection into
4
the tray.
Place the tray into the appropriate shelf and make sure the BIB connec-
5 tion is snug on the nozzle, as shown in Figure 24. Make sure the cabi-
net door is completely closed.
- 25 -
Helix Operator's Manual
Table 12.
Action
Figure 22.
Publication Number: 621058497OPR