System Sanitation - Cornelius HELIX Operator's Manual

Hide thumbs Also See for HELIX:

Table of Contents

System Sanitation

The system now displays the Home Screen, shown in Figure 1.

Before initially placing product into the cabinet, the unit must be sanitized to ensure

there is no contamination of the product when it is placed in the unit.

The unit should be cleaned on a weekly basis (minimum) using the Sanitation Menu.

The menu is accessed from the Menu Screen. The following list of supplies are

needed for this operation:

• Clean Cloths

• Rubber gloves

• Spray bottle with cleaning solution

• Spray bottle with sanitizer solution

• 3 5-gallon buckets

• Sanitation funnel

• Sanitation spyder

• Ice collection tray

To sanitize the system, perform the procedure in Table 4.

Step

From the Home Screen, press the Menu button in the upper left hand

corner as shown in Figure 1.

In the Menu Screen, press the Sanitize button in the top center of the

screen, as shown in Figure 7. This opens the Sanitize menu. Follow

the instructions displayed on the left side of the screen.

Select the weekly product tab and press the Play button, as shown in

Figure 8. The sanitization program steps through the rest of the proce-

dure providing step-by-step instructions.

NOTE: During initial set up, all ingredient lines and blenders must be sani-

tized. When selected, the ingredient image turns grey.

- 13 -

Helix Operator's Manual

Figure 6.

Table 4.

Action

Publication Number: 621058497OPR

Power Switch

Table of Contents