Priming The New Product Bag - Cornelius HELIX Operator's Manual

Helix Operator's Manual

Priming the New Product Bag

Publication Number: 621058497OPR
BIB
Connection
Whenever a product bag is replaced, the bag must be primed.
To prime a product bag, perform the procedure in Table 13.
Step
When the new bag has been placed in the tray, press the Menu button
1
on the Home Screen, shown in Figure 1 on page 10.
2 Place an empty cup in the cup holder, as shown in Figure 19 on page 23.
3 Press the Ingredient Status button on the Menu Screen, shown in Figure 25.
Select the bag that was replaced and then press the Arrow button and
4 follow the steps shown on the screen to complete the priming pro-
cess.(See Figure 26.)
5 Press the Home button to return to the Main Screen
- 26 -
Figure 23.
Figure 24.
Table 13.
Action
© 2012-2014, Cornelius Inc. All Rights Reserved