Blender Sanitation - Cornelius HELIX Operator's Manual

Blender Sanitation

© 2012-2014,Cornelius Inc. All Rights Reserved
Step
Sanitization Preparation: Prepare three, 5-gallon buckets for the clean-
ing process as follows:
Bucket #1: Fill the bucket with cleaning solution (100 ppm, Kay-5
cleaner/sanitizer) mixed as directed on the package.
5
Bucket #2: Fill the bucket with 5 gallons of clean hot water (100° F. - 38°
C).
Bucket #3: Fill the bucket with sanitizer solution (100 ppm, Kay-5
cleaner/sanitizer) mixed as directed on the package.
The Blender Sanitization screen is accessed from the Sanitize screen. It will automat-
ically follow the ingredient sanitation process.
To sanitize the blenders, perform the procedure in Table 6.
Step
1 Wash and sanitize hands or use clean rubber gloves.
Ingredient sanitation is now complete, press Play to start blender saniti-
2
zation.
Remove the cleaning hose from its storage space under the left-front
3
side of the unit, inside the product compartment, as shown in Figure 11.
Sanitation Preparation: Prepare three, 5-gallon buckets for the cleaning pro-
cess as follows:
Bucket #1: Fill the bucket with cleaning solution (100 ppm, Kay-5 cleaner/
4 sanitizer) mixed as directed on the package..
Bucket #2: Fill the bucket with five gallons of clean hot water (100° F. - 38° C).
Bucket #3: Fill the bucket with sanitizer solution (100 ppm, Kay-5 cleaner/
sanitizer) mixed as directed on the package.
- 15 -
Helix Operator's Manual
Table 5.
Action
Figure 9.
Table 6.
Action
Publication Number: 621058497OPR