Unit Startup - Cornelius HELIX Operator's Manual

Helix Operator's Manual

Unit Startup

Publication Number: 621058497OPR
To start the unit, open the control panel by grabbing the lower right-hand corner
and opening it. (See Figure 5.)
!
CAUTION:
If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
Turn on the power switch located behind the control panel, as shown in Figure 6.
- 12 -
Figure 4.
Figure 5.
© 2012-2014, Cornelius Inc. All Rights Reserved
Pull Here