3M Secure Click Manual page 101

Reusable half mask
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
after the expiration date.
[ End of Shelf Life. Date format - mm/yyyy
\ Temperature Range
, Maximum Relative Humidity
: Name and address of Manufacturer
J Dispose in accordance with local regulations
The date of manufacture can be established by examining
the date clock on the inside of the facepiece. See Fig. 11.
The inner segment will display the year, and the arrow will
point to the month of manufacture in the outer segment. The
example shows 01/12/2019 - 31/12/2019. The head harness
assembly and filter holder are also marked with a date wheel
indicating their month and year of manufacture
K Packaging not suitable for food contact.
TECHNICAL SPECIFICATION
Respiratory Protection
3M™ Re-usable
Half Mask with
P1 Particulate Filters
P2 Particulate Filters
P3 Particulate Filters
Class 1 Gas & Vapour Filters
Class 2 Gas & Vapour Filters
Special / Combination Filters
Please refer to EN 529:2005 or AS/NZS1715 workplace
protection guidance for application of these numbers in the
workplace.
Please contact 3M for further information.
Maximum Operating Temperature: +40 °C.
Care should be taken when using the equipment at low
temperatures as excessive moisture may cause the valves to
freeze.
APPROVALS
These products are type approved and audited annually by
either: BSI Group, The Netherlands B.V. Say Building, John
M. Keynesplein 9, 1066 EP Amsterdam, The Netherlands,
Notified Body No. 2797 and / or BSI Assurance UK Ltd,
Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5
8PP, UK, Notified Body No. 0086. These products meet the
requirements of European Regulation (EU) 2016/425 and
applicable local legislation. The applicable European/local
legislation and Notified Body can be determined by reviewing
the Certificate(s) and Declaration(s) of Conformity at
NPF 3M™ Half mask*
10 <Local P1 APF Half Mask>
10 <Local P2 APF Half Mask>
10 <Local P3 APF Half Mask>
10 (or 1000 ppm (0.1% vol)
whichever is lower) <Local Gas
1 APF Half Mask>
10 (or 1000 ppm (0.1% vol)
whichever is lower) <Local Gas
2 APF Half Mask>
Contact 3M for additional
information.
www.3m.com/Respiratory/certs. 3M United Kingdom PLC,
3M Centre, Cain Road, Bracknell, RG12 8HT, United
Kingdom
100

Advertisement

Table of Contents
loading

Table of Contents