Connect A Management Console - Juniper SRX3600 Getting Started Manual

Connect a Management Console

Copyright © 2011, Juniper Networks, Inc.
Figure 13: Connect Out-of-Band Management Network
Plug the other end of the cable into the network device.
2.
Plug the RJ-45 end of the serial cable into the
1.
in Figure 14 on page 15.
Figure 14: Connect Management Console Cable
RE CONS OLE
ALAR M
0
SCB FRON T
0 PWR
HA REAR
1
FAN
1
Plug the female DB-9 end into the device's serial port.
2.
Connect a Management Console
RE CONSOLE 0 port on the SFB as shown
15