Ricoh 1045 Fax Manual page 55

Preparation
You need to program the Groups.
⇒ P.65 "Programing Groups"
Limitation
❒ Group Dial can be used only for
Memory Transmission; it cannot
be used for Immediate Transmis-
sion. The machine automatically
changes to Memory Transmission
when you use Group Dial.
Note
❒ To check the contents of the
Groups, print the list. ⇒ Chapter 7,
"Printing the Group Dial List" in
the Advanced Features manual.
❒ A total of 500 destinations pro-
gramed for Group Dial.
A
Set your original and select any
scan settings you require.
B
Press [Group].
C
Press the group key for the de-
sired group.
A programmed destination and
the total number of destinations is
displayed. Press [ U U U U Prev.] or
[T T T T Next] to see the other destina-
tion.
Note
❒ If you make a mistake, press the
{Clear/Stop} key and start again.
Dialing
2
47