Skoda Karoq 2018 Workshop Manual page 116

Karoq 2018 ➤
Electrical system - Edition 10.2017
8.1.2 Summary of components of steering column switch with control unit for
electronic steering column lock - J764-
1 - Start/stop operation switch
- E693-
❑ Removing and installing
⇒ "2.4 Removing and
installing start-stop
mode switch E693 ",
page 143
2 - Steering column electronics
control unit - J527-
❑ with airbag coil connec‐
tor and return spring
with slip ring - F138-
❑ Removing and installing
⇒ "8.3 Removing and in‐
stalling steering column
electronics control unit
J527 ", page 111
Caution
Risk of damaging the re‐
storing ring.
The restoring ring and
slip ring must not be ro‐
tated against each other
while they are disman‐
tled.
3 - Screw
❑ 3 units
❑ 1.1 Nm
4 - Switch unit on the steering
column
❑ with turn signal light
switch - E2- and wiper
switch for intermittent operation - E22-
❑ Equipment variant with CCS: with CCS switch - E45-
❑ Removing and installing
5 - Switch carrier on the steering column
❑ Removing and installing
6 - Screw
❑ 1.1 Nm
7 - Electronic steering column lock control unit - J764-
❑ Removing and installing ⇒ Chassis, axles, steering; Rep. gr. 48 ; Steering column; Removing and
installing the electronic steering column lock control unit - J764-
8 - Screw
❑ 2 units
❑ 9 Nm
108
Rep. gr.94 - Lights, bulbs, switches - exterior
⇒ "8.2 Removing and installing switch unit on the steering column", page 109
⇒ "8.2 Removing and installing switch unit on the steering column", page 109
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�