Cigarette Lighter, Socket; Removing And Installing Cigarette Lighter U1; Removing And Installing 12-V Socket 3 U19; Removing And Installing Inverter With Socket, 12 V-230 V U13 - Skoda Karoq 2018 Workshop Manual

Karoq 2018 ➤
Electrical system - Edition 10.2017
7

Cigarette lighter, socket

⇒ "7.1 Removing and installing cigarette lighter U1 ", page 162
⇒ "7.2 Removing and installing 12-V socket 3 U19 ", page 162
⇒ "7.3 Removing and installing inverter with socket, 12 V-230 V
U13 ", page 162
7.1 Removing and installing cigarette lighter
- U1-
All notes and comments to this chapter can be found in the Work‐
shop Manual ⇒ Electrical system - General notes ⇒ Electrical
system - General notes; Rep. gr. 96 . If a note cannot be ac‐
cessed, open the Workshop Manual "Electrical System - General
Notes" manually in "ELSA".
7.2 Removing and installing 12-V socket 3 -
U19-
Removing
– Switch off the ignition and all electrical components.
– Remove the cover above the socket from the boot side panel.
– Disconnect electrical plug connection -1-.
– Unscrew nut -5-.
– Pull power socket -2- with socket -3- out of the trim panel -4-.
Installing
Installation is carried out in the reverse order.
7.3 Removing and installing inverter with
socket, 12 V-230 V - U13-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
Note unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Before working on the power socket it is essential to be familiar
with the description of function, basic safety rules and potential
uses of the power socket ⇒ Karoq Owner's Manual .
162
Rep. gr.96 - Lights, bulbs, switches - interior