Rear Window Wiper System; Assembly Overview - Rear Window Wiper System - Skoda Karoq 2018 Workshop Manual

3

Rear window wiper system

⇒ "3.1 Assembly overview - rear window wiper system",
page 57
⇒ "3.2 Removing and installing wiper blade", page 58
⇒ "3.3 Removing and installing windscreen wiper arm",
page 58
⇒ "3.4 Adjusting windscreen wiper arm", page 59
⇒ "3.5 Removing and installing rear window wiper motor V12 ",
page 59
3.1

Assembly overview - rear window wiper system

1 - Cap
2 - Nut
❑ 12 Nm
3 - Wiper arm
❑ Removing and instal‐
ling, setting end position
⇒ "3.3 Removing and in‐
stalling windscreen wip‐
er arm", page 58
4 - Gasket
❑ Fitting position
⇒ "3.4 Adjusting wind‐
screen wiper arm", page
59
5 - Spacer
6 - Rubber ring
7 - M6 nut with washer
❑ 8 Nm
8 - Connector
9 - Rear window wiper motor -
V12-
❑ Removing and installing
⇒ "3.5 Removing and
installing rear window
wiper motor V12 ", page
59
10 - Wiper blade
❑ Removing and installing
⇒ "3.2 Removing and in‐
stalling wiper blade",
page 58
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Karoq 2018 ➤
Electrical system - Edition 10.2017
3. Rear window wiper system
57