Removing The Cable Cover - Paxar Monarch Renegade 4 Operator's Handbook Manual

9490 Operator's Handbook
3. Fit the cable into the groove on the inside of the cable
4. Insert the cable connector into printer's serial port and
5. Insert the screws.
Use the long screws with the boot or the shorter screws
n
without the boot.
Removing the Cable Cover –––––––––––––––––––––––––––––––––––
To remove the cable cover, remove the screws holding the
cover in place and pull it away from the side of the printer.
7-2
All manuals and user guides at all-guides.com
cover.
place the cover against the side of the printer.
TC9490OH Rev. C 3/97