Paxar Monarch Renegade 4 Operator's Handbook Manual page 26

All manuals and user guides at all-guides.com
4. Feed the supplies through the upper opening in the supply
guide.
5. Close the printer and turn the printer on.
6. Wait until the LED flashes one time (about five seconds)
and then press the trigger. The printer advances the
supply to the correct position for printing.
The LED slowly alternates flashing amber and green to
n
indicate the printer is out of supplies. When this happens,
load a new roll of supplies and press the trigger to clear the
error.
Lower
Opening
TC9490OH Rev. C 3/97
Chapter 2. Loading Supplies
Supply
Guide
Upper
Opening
2-13