Chapter 7. Using The Cable Cover; Attaching The Cable Cover - Paxar Monarch Renegade 4 Operator's Handbook Manual

Chapter 7.
You use the cable cover with the industrial version of the
Monarch® Renegade® 4 printer. The cover holds the cable in
place. You can use the cable cover with or without the
printer's boot.
Attaching the Cable Cover––––––––––––––––––––––––––––––––––––
To attach the cable cover:
1. Remove the cable from the printer.
2. Boot Only. Insert the spacers into the holes on the lower
All manuals and user guides at all-guides.com
Using the Cable Cover
right side of the printer. (You can have the boot on or off
the printer.)
TC9490OH Rev. C 3/97
7-1