Reloading A Ribbon Cassette - Paxar Monarch Renegade 4 Operator's Handbook Manual

Reloading a Ribbon Cassette –––––––––––––––––––––––––––––––––
To reload your ribbon cassette, remove the ribbon cassette
from the printer and follow these steps:
1. Locate the end of the cassette with the two latches.
Locate the International Symbols for opening and closing.
n
( ) indicates the cassette is locked (closed). (
the cassette is unlocked (open).
2. Rotate both latches until they snap into the unlocked
3. Lift off the half of the cassette without the latches and set
All manuals and user guides at all-guides.com
position.
it aside.
Ridged End of
Take-up Reel
Latch
Gear
TC9490OH Rev. C 3/97
Chapter 2. Loading Supplies
) indicates
Ribbon
Spool
Foam
Washer
Latch
2-5