Audience; Unpacking The Printer; Connecting The Power Cable - Paxar 610 User Manual

Paxar printers users manual

Hide thumbs Also See for 610:

Table of Contents

Audience

The Operator's Handbook is for the person who prints and applies labels.

After you unpack the printer, you should have: a 610 / 611 / 612 printer, power cord,

communication cable and a ribbon take-up core (may already be on take-up reel).

Keep the box and packaging material in case the printer ever needs repair.

Power cords are not supplied with 230-volt printers. You need to purchase a power cord

separately. The power cord requires IEC 320 STD C13 end finish for the printer interface

and it must meet requirements for 1.6 Amps at 115VAC and 1 Amp at 230VAC.

To connect the power cable:

1. Plug the power cable into the socket.

Plug the other end of the cable into a

grounded electrical outlet.

2. Turn on the printer. Press ( I ) to turn on

and ( O ) to turn off the printer.

For information about replacing the fuse,

see Chapter 4, "Care and Maintenance."

Getting Started

Power Cable

goes here

Users Manual - 610/611/612 Printers

Table of Contents

611 612