Taking The Boot Off The Printer - Paxar Monarch Renegade 4 Operator's Handbook Manual

Taking the Boot off the Printer ––––––––––––––––––––––––––––––––
To take the boot off the printer:
1. Industrial Version Only. Remove the cable from the side
2. With Shoulder Strap Only. Unscrew the knob assemblies
3. Pull on the boot and remove it from around the printer.
4. For both sides of the printer (at the top), put the screw
Do not over-tighten the assembly.
n
5. Industrial Version Only. Reattach the cable using the
All manuals and user guides at all-guides.com
of the printer. Save the spacers and longer screws for
when you want to use the printer with the boot.
on both sides of the printer (including the shoulder strap, if
used), and take them off.
assemblies together (including either shoulder strap, if
preferred), put them into the threaded inserts and screw
them in.
shorter screws without the spacers.
TC9490OH Rev. C 3/97
Chapter 6. Using the Boot
6-3