Chapter 6. Using The Boot; Putting The Boot On The Printer - Paxar Monarch Renegade 4 Operator's Handbook Manual

Chapter 6.
The Monarch® Renegade® 4 printer's boot protects it if you
accidentally drop it, hit it against something, or jar it in some
other manner. Following is an illustration of the boot on the
printer.
Putting the Boot on the Printer –––––––––––––––––––––––––––––––
To put the boot on the printer:
1. Industrial Version Only. Remove the cable from the side
2. Unscrew the screw assemblies at the top of the printer
3. Pull on the boot and fit it around the printer.
All manuals and user guides at all-guides.com
of the printer. Save the cable's screws for when you want
to use the printer without the boot.
(either shoulder strap is optional), and take them off.
Save them for when you want to use the printer without
the boot.
TC9490OH Rev. C 3/97
Using the Boot
6-1