Paxar Monarch Renegade 4 Operator's Handbook Manual page 23

9490 Operator's Handbook
4. Feed the labels over the peel bar and through the lower
5. Close the printer and turn the printer on.
6. Wait until the LED flashes one time (about five seconds)
The LED slowly alternates flashing amber and green to
n
indicate the printer is out of labels. When this happens, load a
new roll of labels and press the trigger to clear the error.
2-10
All manuals and user guides at all-guides.com
opening in the supply guide.
Lower
Opening
and then press the trigger. The printer advances the first
label to the correct position for printing. When you print,
labels peel automatically through the top opening in the
supply guide and the backing paper exits out the bottom
opening.
TC9490OH Rev. C 3/97
Label
Upper
Guide
Opening