Main Messages From The App - Stiga Stig 300 Instruction Manual

PROBLEM
The working area is not
mowed completely.
Parts of the garden not
completely mowed.
The charging base light
does not turn on when
the robot is out of the
charging base.
The charging base light
turns on slowly
The charging base
light turns on with quick
flashing
The warning icon is on
on the keyboard
7.1. MAIN MESSAGES FROM APP
PROBLEM
"No Signal" appears on
the App while the robot
lawn mower is inside
the perimeter and the
LED transmitter in the
charging base is on.
EN
CAUSES
Insufficient working hours.
Cutting device with encrustations
and / or residues.
Pivoting cutting blades blocked by
encrustations or residues.
The working area is too large for
the robot lawn mower's capacity.
Batteries about to exhaust their
life cycle.
Batteries are not charged
completely.
Wrong cut point programming.
The supply voltage is missing
or there is a fault in the charging
base.
The perimeter cable is not
connected or is broken
the perimeter cable is too short
or there is a fault in the charging
base.
It indicates anomaly / failure
conditions.
CAUSES
The robot lawn mower has a
problem in receiving the signal.
SOLUTIONS
Extend working hours (see Par. 4.7.8).
Switch off the robot lawn mower in safety
conditions (see Par. 2.3). Clean the cutting
device.
Switch off the robot lawn mower in safety
conditions (see Par. 2.3). Replace the
cutting blades.
Reduce the work area (see Technical
Data Par. 1.2).
Replace batteries with original spare parts
(see Par. 6.5)
Clean and eliminate any oxidation
from the contact points (See Par. 6.2).
Recharge the batteries.
Correctly program the secondary cut
points correctly (see Par. 4.7.9).
Check that the power supply unit is
plugged in correctly. Check the integrity of
the power supply connection cable.
Check the installation and repair the break
(see Par. 4.5.2)
Check that the length of the perimeter
cable is greater than indicated in
Par. 4.5.1. If necessary, install the resistor
(See Par. 4.5.4). If the problem persists,
contact a service centre.
See the app for more information or
contact a service centre.
SOLUTIONS
Contact an authorized service centre.
7. TROUBLESHOOTING
55