Stiga Stig 300 Instruction Manual page 43

5. OPERATION
Requirements and obligations:
• Installation completed according to
instructions (See Chap.4)
• Powered charging base
• Battery charged (see Par. 5.5)
5.1. CHECK OF SAFETY DEVICES FOR STARTING THE ROBOT LAWN MOWER
Requirements and obligations:
• Safety key.
Procedure:
1. Check that the floating cover (A) is fitted correctly. If the cover is missing the robot lawn mower doesn't
work.
2. Check that the safety key (E) is inserted If it is not inserted the robot lawn mower doesn't start.
3. Check that the stop button "
opens the protective cover (C) of the control console (D).
4. Check that the robot lawn mower is positioned on the ground correctly. In case of excessive tilt
or lift, the tilt sensors (inclinometer) stop the robot lawn mower.
EN
• Programming the robot lawn mower
according to the instructions (see Par. 4.7 for
automatic operation)
• Initial grass height in the range of operation
of the robot lawn mower: 20-60 mm
• Properly adjusted cutting height
(see Par. 5.6).
STOP
" (B) is not active. If pressed, it stops the robot lawn mower and
D
B E
A
C
5. OPERATION
(≥ 45%)
39