Stiga Stig 300 Instruction Manual page 31

3. Remove the cover (C).
4. Positioning the charging base:
• Aligned to the perimeter cable (D2) so that the robot can access it by navigating the perimeter
cable clockwise.
5. Insert the two ends of the cable into the appropriate slots (E2).
6. Cut the ends of the cables to the exact length.
7. Apply the self-drilling connectors on the cable (F), (G), (H).
8. Connect the connectors to the terminals (I).
EN
D2
F
I
E2 E2
G
H
4. INSTALLATION
27