Product Settings - Stiga Stig 300 Instruction Manual

4.7. PRODUCT SETTINGS
Requirements and obligations:
The automatic operation of the robot lawn mower requires a series of settings that can be made via mobile
device (smart phone) iOS or Android with the "STIGA GO" App installed.
The iOS app is downloadable from the iOS App Store. The Android app is downloadable from the Google
Play Store.
The following functions can be set up from the app. Check the table of contents to see which functions are
available for your model:
• Start, stop and force the robot lawn mower to return to the charging base.
• Select the work mode in a closed area that cannot be reached autonomously by the robot lawn
mower.
• Select the Scheduled Job / Single Cutting Cycle mode.
• Schedule Working Hours for the days of the week.
• Set the Work Start Points to make cover the garden uniformly.
• Set the days of the week to perform the edge trimming.
• Enable a low energy eco mode.
• Enable and set the sensitivity of the Rain Sensor.
• Enable different users to use the robot lawn mower via app.
• Choose and contact your reference retailer.
NOTE: The images shown in this section are purely indicative and may differ over time from
those of the product app.
Border Cut
Run Beside Wire
Go-To Cut Points
Eco Mode
Rain Sensor
Closed Area
30
4. INSTALLATION
Stig 300
1
Stig 600
3
Stig 1200
5
EN