Maintenance; Scheduled Maintanance - Stiga Stig 300 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

6.

MAINTENANCE

6.1.
SCHEDULED MAINTENANCE
CAUTION:
Only use original spare parts.
For a better operation and longer life, be sure to clean the product regularly and replace worn parts.
Perform the interventions following the frequency indicated in the table.
FREQUENCY
Weekly
Monthly
At the end of the mowing
season or every six
months if the robot lawn
mower is not used
Annual or at the end of
the cutting season
It is necessary to carry out a maintenance servicing annually at an authorized service centre to keep the
robot lawn mower in good working conditions.
The servicing provides for a series of verifications including:
• The internal and external cleaning of the robot lawn mower;
• the general check of the status of the robot lawn mower;
• the replacement of worn parts;
• the checking of the battery status;
• the verification of tightening torques;
• the verification and possible replacement of the impact and lifting kinematic mechanisms and their
protective bellows;
• the check and, if necessary, replacement of the rubber bellows protecting the blade motor, to
maintain the protection specifications against water infiltrations;
• the replacement of the sealing gaskets of the bodies and the battery compartment to maintain the
specifications of protection against water infiltrations.
NOTE: any malfunction due to not having carried out the annual servicing will not be recognized
under warranty.
EN
COMPONENT
TYPE OF INTERVENTION
Blade
Clean and check blade
efficiency
If the blade is bent due to
impact or if it's worn, replace it.
Recharging
Clean and eliminate any
contacts
oxidising.
Robot lawn mower
Carry out cleaning.
Charging base and
Check for wear or deterioration
power cables
and replace if necessary.
Battery
Perform the
pre-storage charging of the
battery.
Robot lawn mower
Carry out the servicing at an
authorized service centre.
CAUTION:
Do not modify, tamper with,
elude or eliminate the safety
devices installed.
REFERENCE
(See Par. 6.2)
(See Par. 6.3)
(See Par. 6.2)
(See Par. 6.2)
(Contact an
authorised service
centre)
(See Par. 6.4)
(See Par. 6.1)
6. MAINTENANCE
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stig 600Stig 1200

Table of Contents