X Cueing; Playback Between Locate A And B Points - Fostex MR16 Owner's Manual

MR16
Owner's Manual (Advanced playback and locate functions)
By holding down the [F FWD] or [REWIND] key during playback, the recorder enters cueing mode
and you can monitor playback at 3 x speed. It may be useful for searching a specific position.
BOUNCE MODE 15/16 > STEREO WAV FILE
NATURAL BRIGHT
A / IN B / OUT
REWIND
DELETE
REC SELECT
15/16
MASTER
[REWIND] key

Playback between LOCATE A and B points

When the LOCATE A and LOCATE B points are set, you can playback between these points once.
This function is always available regardless of the play mode setting (see "Play mode" on next
page). This function allows you to check the editing part (between LOCATE A and B points) for
copy/paste, erase, etc. See "Part editing" described later.
BOUNCE MODE 15/16 > STEREO WAV FILE
NATURAL BRIGHT
A / IN B / OUT
DELETE
STOP REC SELECT
15/16 MASTER
[STOP] key
Note that this function is available only
<Note>:
when the LOCATE A and B points are set.
See page 53 for details about how to set the LO-
CATE A and B points.
If you carry out the operation above when
<Note>:
the LOCATE A point is set ahead of the LOCATE B
point (i.e. LOCATE A > LOCATE B), the
back audio data from the LOCATE A point to the
REC END points once, then stops.

3 x cueing

MENU / ENTER
BOUNCE
STORE
TIMEBASE SELECT UNDO/REDO
MASTERING
RHYTHM GUIDE CONTRAST DIRECT LOCATE
LOCATE
REWIND F FWD
MAX
LOCATE ABS ZERO LOCATE REC END
RECORD STOP PLAY
A-B PLAY
MIN
MENU / ENTER
BOUNCE
TIMEBASE SELECT STORE UNDO/REDO
MASTERING
RHYTHM GUIDE CONTRAST DIRECT LOCATE
LOCATE
REWIND F FWD
MAX
LOCATE ABS ZERO LOCATE REC END
RECORD STOP PLAY
A-B PLAY
MIN
MR16 plays
• By holding down the [F FWD] key during play
back, the recorder starts cueing forwards at 3 x
speed.
During forward cueing, "
display.
F FWD
• By holding down the [REWIND] key during play
[F FWD] key
back, the recorder starts cueing backwards at 3
x speed.
During backward cueing, "
display.
• While the recorder is stopped, press the [PLAY]
key while holding down the [STOP] key.
The MR16
LOCATE A and LOCATE B points once, then
stops.
PLAY
LOCATE A point
[PLAY] key
While the recorder is playing back between the
LOCATE A and B points, the display shows the
icon as below.
During playback, you can monitor playback
audio of the desired track(s) by raising the ap-
propriate track fader(s), the [MASTER] fader
and the [PHONES] control.
48
" is shown on the
" is shown on the
plays back audio data between the
Playback
LOCATE B point