6)
Rotate the [MENU/ENTER] knob to select the
desired option, and press the [MENU/ENTER] knob.
"Erase Track = *" is now highlighted on the
screen.
7)
Rotate the [MENU/ENTER] knob to move the
cursor to "[ENTER]" on the screen, and press the
[MENU/ENTER] knob.
The display shows "Please Wait", immediately
followed by "Completed" when the MR16
completes erasing.
If you want to cancel the erase op-
<Note>:
eration, move the cursor to " [CANCEL] " on
the screen, and press the [ MENU/ENTER ] knob.
You can copy whole data (from ABS ZERO to REC END) of the desired track(s) of the song cur-
rently loaded and paste it to the other desired track(s). The data on the source track(s) still
remains after the copy/paste operation. Copy/paste operation can be done within the currently
loaded song.
Trk 1
Trk 2
A
B
Trk 1
Trk 2
A
B
You cannot copy/paste track data of a song
<Note>:
protected. Release the protection before copying/
pasting track data.
1)
Load the song you want to edit.
Copying/pasting track data
Trk 3
Trk 4
Trk 5
Trk 6
Trk 7
Trk 6
Trk 3
Trk 4
Trk 5
Trk 7
A
MR16
8)
Press the [MENU/ENTER] knob.
The display now returns to the track edit menu
screen, where "Erase Track " is highlighted.
9)
Press the [STOP] key to exit the menu mode.
<Note>:
result, press the [ UNDO/REDO ] key to undo
the operation (see page 119).
Trk 8
Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
Pasting data of tracks 1/2 to tracks 7/8.
Trk 8
Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
B
2)
While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen.
121
Owner's Manual (Track editing)
If you are not satisfied with the