Time Base; Input And Repro Monitor - Fostex MR16 Owner's Manual

Fostex digital multitracker owner's manual mr16
Hide thumbs Also See for MR16:
Table of Contents

Advertisement

The term, "time base", is used as the reference of recorder position information.
Using the [TIME BASE SELECT] key, you can select from among two time base modes: ABS time
and bar/beat mode. Each screen example below shows the recorder is located at the beginning of
a song in each time base mode.
<ABS time mode>
ABS time mode:
ABS time stands for Absolute time, which is "striped" on the disk when creating a song. It starts from
0m 00s 000ms (=ABS zero, the beginning of a song) and ends by 399m 59s 999ms at maximum.
Bar/beat mode:
The bar/beat/clock information is created according to the internal tempo map.
The ABS zero position is set to "bar -2/beat 1/clk 000" by default (this is called "bar offset").
The MR16 determines the bar/beat/clock value in a song in referenced to the bar offset, as well
as the time signature map and tempo map. You can set the bar offset between bar 1 to bar -8 via
the menu mode (see page 95). The figure below shows the relation between two time base
modes.
Each of the MR16 tracks has two output modes: repro monitor and input monitor.
In the repro monitor mode, the track playback signal is output. So if you want to listen to the
track playback sound, select the repro monitor mode.
In the input monitor mode, the input signal fed to the track is output. So you can check the level
of the input signal to be recorded.
To enter a MR16 track to input monitor mode, press the appropriate [REC SELECT] key to arm
the track (i.e. make the track record-ready), then press only the [RECORD] key to enter the
"RECORD READY" mode or press both the [RECORD] and [PLAY] keys simultaneously to start
recording.

Time base

The beginning of a song
0m00s000ms
(ABS ZERO)
ABS time mode
-2bar 1
000clk
Bar/beat mode
Input monitor and repro monitor
Input signals for
Output signals from
recorder tracks
recorder tracks
Track 1
Track 2
Track 3
READY
Track 4
READY
Track 5
Track 6
Track 15
Track 16
MR16
Owner's Manual (Read this chapter first!)
<Bar/beat mode>
0m03s000ms
0m06s000ms
3bar 1 000clk
1bar 1
000clk
Playback signal (repro monitor)
Playback signal (repro monitor)
Input signal (input monitor)
Input signal (input monitor)
Playback signal (repro monitor)
Playback signal (repro monitor)
Playback signal (repro monitor)
Playback signal (repro monitor)
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents