Editing A Song Name - Fostex MR16 Owner's Manual

Fostex digital multitracker owner's manual mr16
Hide thumbs Also See for MR16:
Table of Contents

Advertisement

You can edit a current song name save the edited song name. Only the current song can be
edited.
1)
Load the desired song of which you are going to
edit the song name.
2)
While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen.
3)
Rotate the [MENU/ENTER] knob to select
"Song ", and press the [MENU/ENTER] knob.
The display now shows the song menu screen,
where "
Back" is highlighted.
4)
Rotate the [MENU/ENTER] knob to select
"Rename Song ", then press the [MENU/ENTER]
knob.
The display now shows the screen for song
name editing of the current song, on which the
rightmost character of song name flashes.

Editing a song name

Flashing
115
MR16
Owner's Manual (Song management)
5)
Use the character entry keys to enter the desired
character to the flashing point.
You can move the cursor (flashing point) by
rotating the [MENU/ENTER] knob (or by
pressing another character entry key).
<Character entry keys>
[REC SELECT] keys on the
A B C 1
MR16 top panel act as charac-
ter entry keys in the menu
mode. For example, the [REC
SELECT] key for track 1 (shown
on the left) can be used for en-
tering A, B, C, a, b, c and 1.
<[DELETE] key>
Pressing the [DELETE] key (the
DELETE
[REC SELECT] key of the track
15/16) deletes the character at
the flashing point. By pressing
this key repeatedly, you can de-
lete all characters under the
flashing point.
If you enter the same name as an
<Note>:
existing song or do not enter a name in step
5 and press the [ MENU/ENTER ] knob in step
6 below, the display shows " Illegal Song
Name! " and returns to the song name edit-
ing screen.
6)
After entering the name, press the [MENU/ENTER]
knob.
The cursor moves to "[ENTER]" at the bottom
of the screen. To cancel the operation, use the
[MENU/ENTER] knob to highlight "[CANCEL]"
and press the [MENU/ENTER] knob.
7)
Press the [MENU/ENTER] knob again.
The edited name is stored and the display
returns to the song menu screen, where
"Rename Song " is highlighted.
8)
Press the [STOP] key to exit the menu mode.
The MR16 exits the menu mode and the
display shows the home screen where the
edited song name is displayed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents