MR16
Owner's Manual (Basic operations)
The MR16 operates by AC power. Before you start using the MR16, you must connect the sup-
plied power cord.
Connect between the [AC IN] connector on the MR16 rear panel and an AC outlet using the supplied
power cord.
[AC IN] connector
When you do not operate the MR16 for a long period of time, we recommend
<Note>:
disconnecting the power cord.
You can turn on or off the MR16 power using the [POWER] switch (pointed by an arrow below).
To turn off the power, press and hold down the [POWER] switch for a few seconds.
BOUNCE MODE
15/16 > STEREO WAV FILE
T
BOUNCE
NATURAL
BRIGHT
WERFUL
MASTERING
Y MODE
A / IN
B / OUT
LOCATE
DELETE
REC SELECT
3/14
15/16
MASTER
MAX
MIN
About power
Power connection
Supplied power cord
Turning on the unit
POWER
[POWER] switch
MENU / ENTER
TIMEBASE SELECT
STORE
UNDO/REDO
RHYTHM GUIDE
CONTRAST
DIRECT LOCATE
REWIND
F FWD
LOCATE ABS ZERO
LOCATE REC END
RECORD
STOP
PLAY
A-B PLAY
USB
When you press the [POWER] switch to
turn on the power for the first time, the
POWER
MR16 starts up and the display shows the
screen as below (note that it takes some
time until the screen as below is shown).
This screen shows that the demo song is
loaded and stopped at the beginning (ABS
0) of the song named "FOSTEX_FEVER".
Follow the procedure described on the
next page to play back the demo song.
30
INPUT A SEL
GTR CLEAN
MIC/LINE
GTR DIST
USB HOST
DIGITAL OUT
MIDI OUT
FOOT SW
AC outlet