Mixing Signals Of Inputs A Through D; Connecting Sound Sources To Input A Through Input D; [To Stereo Buss] Key Setting - Fostex MR16 Owner's Manual

Mixing signals of inputs A through D

The MR16 can mix input signals of [INPUT A] through [INPUT D].
The following diagram shows an example of mixing signals of INPUT A through INPUT D when
bouncing tracks 1 through 8 to tracks 9/10. As you can see, the signals of INPUT A through
INPUT D are mixed to the L/R stereo buss together with the bounced signals.
INPUT A
INPUT B
INPUT C
INPUT D

Connecting sound sources to INPUT A through INPUT D

Before starting track bouncing, connect the desired
sound source(s) to any desired input(s) between
INPUT A and INPUT D.
Sound source (s)
INPUT A INPUT B INPUT C
BAL BAL
UNBAL
/GUITAR INSERT UNBAL UNBAL
TRIM
TRIM
DISTORTION PEAK PEAK
MIN MAX LINE MIC LINE MIC LINE
GUITAR
Adjust the input level of each input using the [TRIM]
control to match the balance with the bounced
track levels.
Also, you can adjust panning of each input for ste-
reo mix. See the next page for details about how to
set panning.
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
TRIM
Track 9
Track 10
INPUT D
BAL BAL
UNBAL
TRIM
TRIM
PEAK
PEAK
MIC LINE MIC
[TRIM] control
MR16
Delay
Reverb
Playback
Playback
Playback
Playback
Playback
Playback
Playback
Playback
Bouncing
Recording
Recording

[TO STEREO BUSS] key setting

To send an input signal of any of the [INPUT A]
through [INPUT D] to the stereo L/R buss, turn on
the corresponding [TO STEREO BUSS] key and ad-
just the send level using the [LEVEL] control.
[TO STEREO BUSS] key
When the [TO STEREO BUSS] key is turned on, the
key illuminates in green. That is, when the key il-
luminates, input signal is sent to the stereo L/R
buss. (Note that when the key flashes, the corre-
sponding input is assigned to any recording track.)
<Note>: If you press the [ TO STEREO BUSS ] key
when make recording other than track bounc-
ing, the key lamp may flash. This shows the
input signal is routed to the armed track. That
is, the input signal will be recorded to the
armed track, in stead of mixed to the stereo
buss.
85
Owner's Manual (Track bouncing)
or
Mixing
STEREO OUT (L, R)
TO STEREO BUSS LEVEL
MIN MAX
[LEVEL] control