Exchanging Whole Track Data - Fostex MR16 Owner's Manual

9) Press the [MENU/ENTER] knob.
The display now returns to the track edit menu
screen, where "Move Track " is highlighted.
10) Press the [STOP] key to exit the menu mode.
<Note>: If you are not satisfied with the re-
sult, press the [ UNDO/REDO ] key to undo the
operation (see page 119).

Exchanging whole track data

You can exchange whole data (from ABS ZERO to REC END) between the desired track(s).
Trk 1 Trk 2
Trk 1 Trk 2
You cannot exchange track data of a song
<Note>:
protected. Release the protection before exchang-
ing track data.
1) Load the song you want to edit.
2) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen.
3) Rotate the [MENU/ENTER] knob to select
"Track Edit ", and press the [MENU/ENTER] knob.
The display now shows the track edit menu
screen.
Trk 3 Trk 4 Trk 5 Trk 6 Trk 7
A B
Trk 3 Trk 4 Trk 5 Trk 6 Trk 7
C D
MR16
Trk 8 Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
C D
Exchanging data between tracks 5/6 and tracks 11/12.
Trk 8 Trk 9 Trk 10 Trk 11 Trk 12 Trk 13 Trk 14 Trk 15 Trk 16
A B
4) Rotate the [MENU/ENTER] knob to select
"Change Track ", and press the [MENU/ENTER]
knob.
The display now shows the screen for select-
ing the source track(s) and destination track(s)
of the exchange operation.
"Source Track" selects the exchange source
track(s), while "Dest. Track" selects the exchange
destination track(s).
125
Owner's Manual (Track editing)