Fostex MR16 Owner's Manual page 106

MR16
Owner's Manual (Data export to a personal computer)
<Editing a file name>
You can edit a file name by the follow-
ing procedure.
1) After selecting the range of track data to
be converted, rotate the [MENU/ENTER]
knob to move the cursor to "NAME" and
press the [MENU/ENTER] knob.
The rightmost character of the file name
starts flashing. You can now start
editing.
While the rightmost character is flash-
ing, pressing the [DELETE] key repeat-
edly deletes the current file name.
2) Enter a new name using the character
entry keys.
Pressing a different character entry key
automatically moves the cursor right.
If two successive characters are assigned
to the same character entry key, rotate
the [MENU/ENTER] knob after selecting
the first character to move the cursor
right.
3) After entering a new name, press the
[MENU/ENTER] knob.
The entered name is set and the display
returns to the previous screen.
The screen example below shows the
name is set to "Original Name".
Then, by pressing the [MENU/ENTER] knob
while holding down the [RECORD] key to carry
out the WAV file conversion.
Flashing
106