Installer Manual 255/LOGIX 742-762-764 - Programming
6.3.
Basic programming
Note
Menus are displayed in a defined and incremental order.
6.3.1. Basic programming 742 - 762 controller
6.3.1.1 Program valve type
Set your valve type through the options.
A
Use
and
→ Valve type flashes.
B
Choose the 255 valve type.
C
Press
to validate the valve type selected and advance to
the next parameter.
D
If an incorrect setting is programmed, see "Resetting the
controller", page 57.
6.3.1.2 Program system size
Set your resin volume in liters.
A
Use
and
→ Three dashes than resin volume flashes.
B
Choose the nearest volume to your actual system size.
C
Press
to validate the system size selected and advance to
the next parameter.
D
If an incorrect setting is programmed, see "Resetting the
controller", page 57.
6.3.1.3 Time setting
Set the current time.
A
Press
.
→ Time flashes.
B
Adjust displayed time with
C
Press
to validate the selection and advance to the next
parameter.
6.3.1.4 Day of week
Set the current day of the week.
A
Press
.
→ Arrow flashes.
B
Select displayed day with
C
Press
to validate the selection and advance to the next
parameter.
46 / 92
to scroll through valve type choices.
to scroll through resin volume choices.
and
and
.
.
Ref. MKT-IM-021 / A - 20.02.2019