Advertisement
Setting
Relay Outputs
Battery test
Bypass Limits
Screen Saver
Timeout
Meters
Lamp Test
HMI backlight
Control P/W level
1
Control P/W level
2
Reset statistics
Minimum required
kVa
User kVa
Redundant level
7 7 . . 3 3
S S i i g g n n i i n n g g i i n n
If the level 1 password is enabled, you need to sign in.
1. Press the lock icon in the top right corner of the screen.
2. Type in your password and press OK.
You are signed in.
3. Press Continue to return to the previous screen.
You have 3 attempts to type in the password. If an incorrect password is given more than 3 times, you
need to wait for 30 minutes before trying again.
Table 23. Default passwords
Level
Name
1
USER
2
CONTROL
EATON 93PM G2 UPS
USER'S AND INSTALLATION GUIDE
Description
Configure the relay outputs.
Change the power level and duration for battery test.
Change the bypass voltage or bypass frequency.
Change the screen saver timeout.
Change the meters format.
Enable the lamp test.
Adjust the backlight brightness.
Change the level 1 password, or remove the password on level 1. The default
value is 1111.
Change the level 2 password. The default value is 1010.
Reset all statistics.
Change the minimum required kVa.
Configure UPS output kVA rating.
Configure UPS internal redundancy level.
Password
NONE
1111
P-164000956 - February 2021
Description
USER
USER + CONTROL
www.eaton.eu
7 7 4 4
Advertisement
