Download Print this page

Eaton 93PM G2 User And Installation Manual page 12

50 -360 kva
Hide thumbs Also See for 93PM G2:

Advertisement

EATON 93PM G2 UPS
USER'S AND INSTALLATION GUIDE
Batteries present a risk of electrical shock or burn from high short-circuit current.
Obey proper precautions.
Electric energy hazard. Do not attempt to alter any battery wiring or connectors.
Attempting to alter wiring can cause injury.
Do not open or mutilate batteries. Released electrolyte may be toxic and is
harmful to the skin and eyes.
Batteries can contain HIGH VOLTAGES, and CORROSIVE, TOXIC and
EXPLOSIVE substances. Because of the battery string the output terminals can
carry high voltage even when the AC supply is not connected to the UPS. Read
the shutdown instructions carefully.
IMPORTANT: The battery may consist of multiple parallel strings. Make sure
that you disconnect all strings before installation.
Only qualified service personnel knowledgeable of batteries and the required
precautions are allowed to do the installation or service work on batteries. Keep
unauthorized personnel away from the batteries. Before you install or replace batteries,
consider all the warnings, cautions, and notes concerning appropriate handling. Do not
disconnect the batteries when the UPS is in the Battery mode.
Make sure that your replacement batteries are of the same number and type as
the battery that was originally installed in the UPS. See more accurate
instructions on the UPS.
Before you connect or disconnect battery terminals, disconnect the charging
source by opening the corresponding battery circuit breaker.
If the battery is inadvertently grounded, remove the source of the ground. All
batteries in all UPS models are ungrounded.
Discard batteries according to your local disposal requirements. Do not dispose
of batteries in a fire. When exposed to flame, batteries may explode.
To ensure proper cooling airflow and to protect personnel from dangerous
voltages inside the unit, keep the UPS door closed and the front panels
installed.
Do not install or operate the UPS system close to gas or electric heat sources.
Keep the operating environment within the parameters stated in this document.
Keep the surroundings of the UPS uncluttered, clean, and free from excess
moisture.
Obey all DANGER, CAUTION, and WARNING notices affixed to the equipment.
WARNING
CAUTION
CAUTION
P-164000956 - February 2021
www.eaton.eu
1 1 2 2

Advertisement

loading