Sample Power Consumption Scenarios - Airlink101 LX60 Hardware User's Manual

Sample Power Consumption Scenarios

Table 1-1: Power Consumption Scenarios
Standby Mode
Serial
Ethernet 2x
Ethernet 2x
Ethernet 2x
Wi-Fi AP 5GHz
Wi-Fi AP 5GHz +
Typical Use
Typical Use
Maximum Power
Maximum Power
Inrush Current
Rev. 2 June 2021
Scenario
—
Idle Attached
Idle Attached
(10 BaseT)
Idle Attached
(100 BaseT)
Idle Attached
(GigE)
Idle Attached
Idle Attached
GNSS
Attached and
(non-Wi-Fi) connected (20
dBm)
Attached and
(Wi-Fi) connected (20
dBm)
Attached and
(non-Wi-Fi) connected (23
dBm)
Attached and
(Wi-Fi) connected (23
dBm)
1.5 A @ 12 V (Averaged over 100 s)
a. Power consumption was measured at 12 V.
Radio Notes
—
Serial enabled
10 BaseT Full duplex
100 BaseT Full duplex
1000 BaseT Full duplex
Wi-Fi enabled (idle)
GNSS and Wi-Fi enabled
(idle)
100 BaseT Full duplex,
Serial and USB enabled
(idle)
100 BaseT Full duplex,
Serial, USB, and Wi-Fi
enabled (idle), GNSS
active
Ethernet enabled (Iperf
running with Auto
negotiation as speed
setting), Serial enabled
(recurring command),
USB enabled (pinging)
Ethernet enabled (Iperf
running with Auto
negotiation as speed
setting), Serial and GNSS
enabled (recurring
command), USB enabled
(pinging), Wi-Fi enabled
(Iperf running)
9
Introduction to the LX60
LTE Cat-M
Power
a
Power
35 mW 35 mW
(2.9 mA) (2.9 mA)
800 mW 800 mW
(66.6 mA) (66.6 mA)
900 mW 900 mW
(75 mA) (75 mA)
1100 mW 1100 mW
(91.6 mA) (91.6 mA)
1700 mW 1700 mW
(141.6 mA) (141.6 mA)
1100 mW n/a
(91.6 mA)
1300 mW n/a
(108.3 mA)
4100 mW 2400 mW
(341.6 mA) (200 mA)
4400 mW n/a
(366.6 mA)
6600 mW 5937 mW
(550 mA) (495 mA)
7000 mW n/a
(583.3 mA)
41111782