Recommended Antenna Separation; Step 4-Connect The Data Cables; Step 5-Connect The Power - Airlink101 LX60 Hardware User's Manual

AirLink LX60 Series Hardware User Guide
Figure 2-4: Antenna Connectors

Recommended Antenna Separation

The recommended antenna separation is related to the band frequency/wavelength. To
accommodate the shortest frequency/longest wavelength band supported by the LX60,
Sierra Wireless recommends a minimum antenna separation of 214 mm for best results,
and if necessary, a separation of 107 mm for acceptable results.
Table 2-1: Frequency / Wavelength Range and Recommended Antenna Separation for the
AirLink LX60
Service Wavelength Range for LX60
LTE Longest
LTE Shortest
Step 4—Connect the Data Cables
The LX60 has the following ports for connecting data cables:
•
•
•
•
Note: In vehicle installations, separate antenna, data, and power cables from other wiring.
Step 5—Connect the Power
The AirLink LX60 comes with a 3 meter (10 ft.) DC power cable. You can also purchase
an optional AC adapter.
Warning:
thoroughly trained in safe electrical wiring procedures.
Rev. 2 June 2021
Cellular antenna connector
Frequency
(MHz)

700

2600
USB (Micro-AB)
2 × Ethernet (RJ-45)—Use a Cat 5e or Cat 6 Ethernet cable
Serial Port (9-pin RS232)
Aux I/O Port (2-pin RS)
Electrical installations are potentially dangerous and should be performed by personnel
Diversity antenna connector
Wi-Fi antenna connector
GNSS antenna connector
Wavelength Best Antenna

( ) (mm) Separation (mm) (1/2
428
115
16
Good Antenna

) Separation (mm) (1/4
214 107
58

)
29
41111782