Step 1-Insert The Sim Card - Airlink101 LX60 Hardware User's Manual

AirLink LX60 Series Hardware User Guide
The following sections describe these steps in detail. Read these sections carefully before
performing the installation.
Warning:
change the default password after logging in to ACEmanager. However, if the unit must be reset to
factory default settings, your custom password may also be reset to default (depending on the
Reset Mode configured in ACEmanager). Before installation, please record the default password
and store it in a secure place. See also
Avertissement :
vous recommandons fortement de le changer dès que possible (option dans AceManager). Notez
que si l'unité est réinitialisée aux paramètres d'usine, le mot de passe pourrait également être réini-
tialisé à sa valeur d'origine (selon le mode de réinitialisation configuré dans ACEmanager). A cet
effet, nous vous recommandons de noter ce mot de passe et de le garder dans un endroit sûr avant
de déployer la dite unité. Pour plus d'information, veuillez consulter
aux paramètres d'usine par défaut "
Note: Depending on where you are installing the LX60, you may want to mount the router before
connecting the antenna, cables and power.
Step 1—Insert the SIM Card
If the SIM card has not already been installed, insert the SIM card into the router before
connecting any external equipment or power to the router.
To install the SIM card:
1. Use a #1 Phillips screwdriver to remove the SIM card cover.
2. Orient the SIM card as shown in
3. Gently slide the SIM card into the slot until it clicks into place.
4. Replace the SIM card cover. Tighten the screw to approximately 1.3 in-lb (1.5 cm-kg).
Rev. 2 June 2021
The default ACEmanager password is printed on the device label. You should always
Le mot de passe de ACEmanager est imprimé sur l'étiquette de l'unité. Nous
To remove the SIM card, press the SIM card in, and release it. Gently grip the SIM
card and pull it out.
Reset the LX60 to Factory Default Settings
Figure 2-1 (with the gold contacts facing down).
12
on page 35.
page 35 " Réinitialiser le LX60
41111782